Edge bander return conveyors

Curved Edge Bander Return Conveyor for Furniture Panels

FORTRAN curved edge bander return conveyor for furniture panels. Match the return route, turning clearance and operator handover to the actual machine layout.

Working height950±50mm
Workpiece length150-2750mm

Product overview

FORTRAN curved edge bander return conveyor for furniture panels. Match the return route, turning clearance and operator handover to the actual machine layout.

Selection checklist

Workpiece

Panel length, width, thickness and weight.

Process

Equipment inlet and outlet direction, working height and production rhythm.

On-site

Factory layout, workstation spacing and operating space.

Technical specifications

Specifications follow the product information. Confirm the supplied configuration with the FORTRAN technical team.
Working height950±50mm
Workpiece thickness10~60mm
Workpiece length150-2750mm
Maximum load60 kg
Workpiece width150-1220mm
Speed18-32 M/min

Planning a curved return path around an edge bander

A curved edge bander return conveyor carries furniture panels from the machine outfeed around a return path toward the operator or the next infeed point. The return conveyor handles the workpiece; edging, trimming and other processing remain functions of the separately specified edge-banding machine.

Plan the whole panel path rather than only the conveyor footprint. The longest panel, its orientation through the curve and the receiving position determine the clearance that needs to be checked in the layout.

Information for a return conveyor layout

  • Show the edge-bander infeed and outfeed, feed direction, working height and desired operator position.
  • Provide the smallest, largest and typical panel sizes, weight and surface finish; identify panels that need a different handling route.
  • Mark access doors, maintenance space and adjacent workstations, then check the swept area of panels throughout the curve.

Edge bander return conveyor selection questions

Can a curved return conveyor be added to an existing edge bander?

Provide a dimensioned layout and the existing machine interfaces for an integration review. The proposed infeed, outfeed and control handover must be agreed for that installation; the product name does not establish universal machine compatibility.

How much space is needed around the return curve?

Check the complete panel envelope from outfeed to the receiving point, including the longest panel and operator access. Conveyor dimensions alone do not describe the space occupied by a panel while its direction changes.

Does conveyor speed determine the number of finished panels per minute?

No. Panel length, spacing, processing passes and the edge-bander cycle also affect sustained output. Use a representative size mix and the agreed transfer sequence when reviewing the line rather than converting conveying speed directly into production capacity.

What should be checked with finished furniture panels?

Agree the contact surfaces, support and transfer gaps, then inspect representative samples after the complete return route. Include small panels and the most sensitive finish in the trial and define the acceptable surface condition.

What layout is needed to evaluate a curved panel return path?

Show the edge-bander outfeed, the operator or next infeed position and the space around the bend. Draw representative long and short panels on the route. Include the required entry and exit orientation so clearance and support can be reviewed through the return.

Equipment to compare or connect

Compare panel conveyor and transfer arrangements

Ask FORTRAN about this return conveyor layout

Product resources

Product image

Download image

Chinese / English specifications

Download details

Data version: 2026-09-30· Original product source

Discuss your equipment needs with us

FORTRAN

Packaging · Conveying · Lifting · Loading · Cleaning

+86 166 7576 2221
sufortran@gmail.com
Send an inquiry